We offer a comprehensive selection of grinding and cutting wheels consists of 45 unique products ranging in diameters from 4-1/2 in. to 14 in., with arbor configurations of 7/8 in., 20mm, 1 in. and 5/8 in.-11. We have three types of abrasive grains, Aluminum Oxide, Silicon Carbide, and Zirconia Alumina, providing products for general purpose to specialized high performance applications.
We have a full line of metal and concrete grinding and cut-of wheels, metal conditioning disks, cup wheels, diamond wheels, type 1, 11, 27, 28 and 29 wheels along with guards.
"Buffing and polishing using wheels and 'compounds' is somewhat like using wet and dry sanding paper, only much faster. Instead of using 'elbow grease' you will be using the power and speed of an electric motor. The edge, or face, of the wheel is the 'sanding block', which carries a thin layer of 'compound' which is the sandpaper. Varying types of wheel are available, and the different grades of compound are scaled similar to sandpaper. The compounds are made from a wax substance which has the different abrasive powders added to it. When this hard block is applied to the edge of a spinning buffing wheel, the heat from the friction melts the wax, and both wax and abrasive are applied in a thin slick to the face of the wheel.