Pieh Legacy Collection!
A gas forge for the Professional Blacksmiths Shop is finally available!
- Heats 1-1/4" barstock to a yellow heat with ease!
- Balanced Gas Mixture - only minimal scale!
Pieh Tool is excited to announce "The Smithy's" gas forge. Our 3 burner forge was designed specifically for the artist blacksmith. It boasts the largest firebox available in the portable gas forge market! You now have ample space to work with pieces of varying dimensions-awkward pieces can be worked that just won't fit in other forges! Blacksmiths have been limited to forges designed for horseshoer's - with extremely small heating chambers - only 3" high, 6-9" deep and 12-13" wide. Not any more!
This makes the perfect production shop forge because two smiths can work from both ends. The Smithy's Gas Forge has three doors that flip open allowing different access points. The end doors also feature generous window ports for handling long pieces. Both end doors can remain open should you need the extra space while heating pieces with odd dimensions. The front door also can be propped open.
The heating chamber height can be reduced easily by purchasing our Smithy Forge Insert. It all depends on your needs. This will allow you to reduce your fuel consumption when the larger space is not needed.
And finally, this forge is Insulated! We have done our utmost to help conserve your fuel costs. Just check out the specification chart below regarding the insulation used in this unit. Relining is a simple task that takes only a few minutes and requires nothing more than a 5/16" wrench.
- Professional Grade, Commercial Quality!
- Internal Volume - 1288 cubic inches!
- Fabricated with 12 gauge steel and a 5/16" frame
- High efficiency burners - Machined burner bells
- 3 Burners - Uniform heat
- 2 Bar-stock ports
- Heats very quickly - Reaches Welding Heat easily!
- Flexible - 3 hinged doors and optional adjustable floor
- Quick and easy relining
- Venturi Style - No blower needed
- LP Gas
- Portable
- 9' Hose and Fisher Regulator, Pressure Gauge with POL included
- Quality Guaranteed... Pieh Tool stands behind its products
- Designed and fabricated in the USA
Operational Manual is included.
Forge can only be shipped motor freight, and arrives ready to use with only minor assembly required.
*OPTIONAL INSERT AVAILABLE!. When you have a smaller job the insert will reduce the forge height to 3 3/4". This will allow a faster heat and lower fuel usage. Gas pressure can be then be reduced to 12-15 psi.
The Pieh Tool Smithy's Forge Specifications
| Burners |
3 Machined burner bells (One piece assembly) |
| Open Ports |
2 End Ports : 5 x 4 3/4" |
| Hinged Doors |
3 (all can be propped open) Door handles are threaded to accept wood file handles |
| Fuel Type |
LP Gas |
| Firebox Height |
7" |
| Firebox Depth |
11 1/2" |
| Firebox Width |
16" |
| Insulation - Doors |
1", 8 lb density 2600 degree Cereblanket (Kao Wool) |
| Insulation - Rear Wall |
1" 2600 degree Ceramic Fiberboard with 1" Cereblanket behind it (2" total insulation) |
| Insulation - Ceiling |
2" 2600 degree Ceramic Fiberboard |
| Insulation - Floor |
3200 degree Dense Ceramic Firebrick |
| Regulator |
Fisher #67CH-743 (3-35 psi) |
| Shut Off Valve |
Needle Valve |
| Hose Length |
9' U/L |
| Shell Dimensions |
13 H x 15" D x 18 1/2" W (25" H including burner assembly) |
| Weight |
75 lbs |
Item #: PTSPF-3, PTSPF-3Insert